This product is a laminated product made from non-alkali glass cloth dipped in epoxy resin by hot pressing. It has anti-static (anti-static) characteristics and good mechanical processing performance. The anti-static plate can be divided into three types: full anti-static plate, single-sided anti-static plate and double-sided anti-static plate.Suitable for electronic and electrical industries.1.Anti-static properties; 2.Good mechanical properties; 3.Moisture resistance; 4.Heat resistance; 5.Temperature resistance:Grade B

NO.	ITEM			UNIT	INDEX VALUE
1	Density			g/cm³	1.8-2.0
2	Water absorption Rate			%	<0.5
3	Vertical bending strength			MPa	≥350
4	Vertical compression strength			MPa	≥350
5	Parallel impact strength (charpy type-gap)			KJ/m²	≥33
6	Tensile strength			MPa	≥240
7	Surface Insulation Resistance			Ω	1.0×106~1.0×109

Appareance: the surface should be flat, free of bubbles, pits and wrinkles, but other defects that do not affect the use are allowed, such as: scratches, indentation, stains and a few spots.The edge shall be cut neatly, and the end face shall not be delaminated and cracked.Appy to electronic,electrical and other industries,can be used as anti-static hollow plate for current isolation and service for various test smelter manufacturers, ICT test smelter manufacturers, ATE vacuum smelter manufacturers, functional smelter manufacturers and various electronic and motherboard manufacturers.